Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 Reference Manual page 43

show log data
Copyright © 2010, Juniper Networks, Inc.
category
-------------------------
NameResolverLog
aaaAtm1483Cfg
aaaEngineGeneral
aaaServerGeneral
addressServerGeneral
atm
atm1483
atmAal5
bgpConnections
...
cliCommand
controlNetworkSlave
cops
...
udpTraffic
* Default severity setting is overridden by the system-wide severity
setting.
* Default severity setting is overridden by the individual log severity
setting.
See show log configuration.
Use to display system events.
Use keywords to select which events are displayed:
category—Limits the display to a single log event category. See the CLI online Help
for available categories.
Example
host1#show log data category os
delta—Limits the display to events that occurred after the time set with the log
baseline command.
nv-file—Displays the information that is currently logged to nonvolatile storage.
Chapter 1: System Logging Overview
severity verbosity filters
-------- --------- -------
ALERT# low
ALERT# low
ALERT# low
ALERT# low
ALERT# low
WARNING* low
ALERT# low
ALERT# low
ALERT# low
ALERT# low
ALERT# low
ALERT# low
ALERT# low
19