Bgpevents - Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 Reference Manual

Filter 1
Filter 2
Filter 3
Filter 4
Filter 5
Filter 6

bgpEvents

Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
Filter 3
Filter 4
Filter 5
Copyright © 2010, Juniper Networks, Inc.
access-class—This filter is not currently supported
peer—See description of the bgpRoutes peer filter for information about this filter
route-map—This filter is not currently supported
router—See description of the bgpRoutes router filter for information about this filter
in—This filter is not currently supported
out—This filter is not currently supported
BGP finite state machine (FSM) events and transitions
None
None
None
Event occurred that was not expected for current state
None
One of the following events occurred: start, stop, inbound-connection-arrived,
outbound-connection-complete, connection-error, connection-closed, start-timer-expired,
connect-timer-expired, hold-timer-expired, keep-alive-timer-expired, open-received,
update-received, keep-alive-received, notification-received, route-refresh,
route-refresh-cisco
None
None
access-class—This filter is not currently supported
peer—See description of the bgpRoutes peer filter for information about this filter
route-map—This filter is not currently supported
router—See description of the bgpRoutes router filter for information about this filter
in—This filter is not currently supported
Chapter 4: B Commands
37