Radius - NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Software Administration Manual

GS700TS Smart Switch Software Administration Manual
Change Password
The Change Password screen contains parameters for configuring device passwords.
Authentication on this device uses only a password, not a username.
To change the device password:
1.
Click Security > Management Security > User Configuration > Change Password. The
Change Password screen displays:
Figure 6-1
The Change Password screen contains the following fields:
• User Name – Displays the User Name.
• Old Password – Enter the current password for accessing the system.
• New Password – Enter a new password for accessing the system.
• Retype New Password – Repeat the new password used to access the system.
2. Enter the Old Password, New Password and Retype New Password in the provided fields.
3. Click APPLY to update the device.

RADIUS

Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for
networks. RADIUS servers provide a centralized authentication method for web access. The user-
assigned RADIUS parameters are applied to newly defined RADIUS servers. If values are not
defined, the system defaults are applied to the new RADIUS servers.
To configure RADIUS servers:
1.
Click Security > Management Security > RADIUS. The RADIUS screen displays:
6-2
v1.0, June 2009
Managing Security