GS700TS Smart Switch Software Administration Manual
To configure port-based authentication global properties:
1.
Click Security > Port Authentication > Advanced > Port Authentication. The Port
Authentication screen displays
Figure 6-8
The Port Authentication screen contains the following fields:
•
Interface – Displays the interfaces.
•
User Name – Displays the supplicant (client) user name, once the user is authenticated.
•
Port Control – Select the port authorization state.
–
Auto – Indicates the port control is set to Auto and a single client has been
authenticated via the port.
–
Authorized – Indicates the port control is Forced Authorized, and clients have full port
access.
–
Unauthorized – Indicates either the port control is force Unauthorized, or the port
control is Auto but a client has not been authenticated via the port.
Managing Security
v1.0, June 2009
6-13