NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Software Administration Manual page 128

GS700TS Smart Switch Software Administration Manual
• Root Port – Displays the port number that offers the lowest cost path from this bridge to
the Root Bridge. This field is significant when the bridge is not the Root Bridge. The
current root port is zero when the device is not connected to the network.
• Root Path Cost – Displays the cost of the path from this bridge to the Root Bridge. The
current root path cost is zero when the device is not connected to the network.
MSTP Status
• MST ID – Specifies the instance to which the VLAN is assigned.
• VID – Displays the VLAN ID.
2. Enter the Bridge Priority in the provided field.
3. Select Hello Time, Max Age, Forward Delay or Spanning Tree Maximum Hops and enter
the value in the provided field.
4. Click APPLY to update the device.
CST Port Configuration
The CSP Port Configuration screen contains parameters for assigning Common Spanning Tree
(CST) values to interfaces.
To configure CST ports on the device:
1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port
Configuration screen displays:
Figure 4-23
4-35
v1.0, June 2009
Configuring Switching Settings