NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Software Administration Manual page 80

GS700TS Smart Switch Software Administration Manual
• Provides troubleshooting information. LLDP-MED sends network managers alerts for:
– Port speed and duplex mode conflicts
– QoS policy misconfigurations
To configure LLDP-MED Network Policy:
1. Click System > LLDP > Advanced > LLDP-MED Network Policy. The LLDP-MED
Network Policy screen displays:
Figure 3-24
The LLDP-MED Network Policy screen contains the following fields:
• Network Policy Number – Select the network policy number. The field range is 1 - 32.
• Application – Select the application for which the network policy is defined. The possible
field values are:
– Voice – Indicates the network policy is defined for a Voice application.
– Voice Signaling – Indicates the network policy is defined for a Voice Signaling
application.
– Guest Voice – Indicates the network policy is defined for a Guest Voice application.
– Guest Voice Signaling – Indicates the network policy is defined for a Guest Voice
Signaling application.
– Softphone Voice – Indicates the network policy is defined for a Softphone Voice
application.
– Video Conferencing – Indicates the network policy is defined for a Video
Conferencing application.
3-45
v1.0, June 2009
Managing System Settings