This appendix provides default settings for the NETGEAR Model GS700TS Smart Switch. You
can always configure the switch to default settings by using the Factory Reset function from a Web
browser.
Table A-1. Default Settings
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
GS700TS Default Setting
Auto-negotiation
Auto-negotiation
Disabled
Disabled
DHCP enabled
password
802.1q based VLAN
Disabled
Optimized for flow control, all ports set normal priority
V1.0, June 2009
Chapter A
Default Settings
A-1