Using The Netgear Web Management System Options; Device Management Buttons - NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Software Administration Manual
Gigabit stackable smart switch
Hide thumbs
Also See for GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch:
- Datasheet (3 pages) ,
- Installation manual (2 pages) ,
- Hardware installation manual (38 pages)
Table of Contents
Advertisement
GS700TS Smart Switch Software Administration Manual
Work Area – Located on the right side of the NETGEAR GS700TS web browser interface and
marked as 3 in Figure 2-2. The Work Area contains device tables, general device information, and
configurable device parameters.
For further description of the functions, refer to the appropriate section of this manual:
•
Chapter 3, "Managing System Settings"
•
Chapter 4, "Configuring Switching Settings"
•
Chapter 5, "Configuring QoS"
•
Chapter 6, "Managing Security"
•
Chapter 7, "Monitoring the Switch"
•
Chapter 8, "Maintenance"
•
Chapter 9, "Online Help"
Using the NETGEAR Web Management System Options
The GS700TS web browser interface provides the following options:
•
Device Management Buttons – Provides an explanation of the management buttons in the
NETGEAR GS700TS Smart Switch.
•
Informational Services – Provides access to informational services including technical
support, online help and device information.
•
Using Screen and Table Options – Provides an explanation of specific GUI characteristics
and tables for configuring the device.
Device Management Buttons
The NETGEAR GS700TS Smart Switch web browser GUI management buttons allow network
managers to easily configure the device from remote locations. The management buttons are
shown below:
Table 2-1. Device Management Buttons
Button Name
ADD
APPLY
CANCEL
2-3
describes how to configure the System functions.
describes how to configure the Switch functions.
describes how to configure QoS functions.
describes how to configure Security functions.
describes how to configure Monitoring functions.
describes maintenance functions, such as firmware upgrade.
describes how to obtain online help and support.
Description
Adds information to tables or information windows.
Applies configured changes to the device.
Cancels modifications to tables or information windows.
v1.0, June 2009
Introduction to the Web Browser Interface
Hide quick links:
Advertisement
Table of Contents
