Authentication Type - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

3. Perform one of the following actions:
To add a RADIUS server:
a. Define all fields that are listed in
b. Click Add.
To delete a RADIUS server:
a. Select the check box to the left of the host IP address of the RADIUS server that you want
to remove.
b. Click Delete.
To change the authentication fields of a RADIUS server:
a. Select the check box to the left of the host IP address of the RADIUS server for which you
want to make changes.
b. Make changes to the authentication fields.
c. Click Apply.

Authentication Type

The Authentication Type screen lets you specify the order in which authentication is performed:
1. Select Security > Management Security > Authentication Type. A screen similar to the
following displays.
Figure 5-7
Configuring QoS and Security
GS108T Smart Switch Software Administration Manual
step 2.
v1.0, December 2007
5-9