NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual page 100

GS108T Smart Switch Software Administration Manual
2. Under Port Selection, the following fields are displayed, both of which are configurable:
• Port. Specifies the port for which the EAP statistics are to be shown. Select a port from
the drop-down list.
• Refresh Rate. Specifies the period that passes before the EAP statistics are refreshed. The
possible field values are:
– 15 Sec. Specifies that the EAP statistics are refreshed every 15 seconds.
– 30 Sec. Specifies that the EAP statistics are refreshed every 30 seconds.
– 60 Sec. Specifies that the EAP statistics are refreshed every 60 seconds.
– No Refresh. Specifies that the EAP statistics are not refreshed.
3. Click Apply.
Under EAP Statistics, the following information is shown for the selected port:
• Frames Receive. Specifies the number of received valid EAP over LANs (EAPOL)
frames.
• Frames Transmit. Specifies the number of transmitted EAPOL frames.
• Start Frames Receive. Specifies the number of received EAPOL start frames.
• Log off Frames Receive. Specifies the number of received EAPOL logoff frames.
• Respond ID Frames Receive. Specifies the number of received EAP respond ID frames.
• Respond Frames Receive. Specifies the number of received valid EAP response frames.
• Request ID Frames Transmit. Specifies the number of transmitted EAP request ID
frames.
• Request Frames Transmit. Specifies the number of transmitted EAP request frames.
• Invalid Frames Receive. Specifies the number of received unrecognized EAPOL frames.
• Length Error Frames Receive. Specifies the number of received EAPOL frames with an
invalid packet body length.
• Last Frame Version. Specifies the protocol version number attached to the most recently
received EAPOL frame.
• Last Frame Source. Specifies the source MAC address attached to the most recently
received EAPOL frame.
4. To retrieve the current count from the switch and update the screen, click Refresh (optional).
6-6
v1.0, December 2007
Monitoring, Maintenance, and Help