Reset; Device Reboot - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

GS108T Smart Switch Software Administration Manual

Reset

The Reset menu lets you reset the switch with its current configuration or its factory default
values.

Device Reboot

The Device Reboot screen lets you restart the switch with its current configuration.
To reset and restart the switch:
1. Select Maintenance > Reset > Device Reboot. A screen similar to the following displays.
.
Figure 6-11
2. Under Device Reboot, select the check box.
3. Click Apply to restart the switch.
Note: You can also use the Reset button on the front panel of the Smart Switch to reset the
switch to its current configuration.
Monitoring, Maintenance, and Help 6-17
v1.0, December 2007