NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual page 83

.
Figure 5-8
2. Under 802.1x Configuration, the following fields are displayed, all of which are configurable:
• Port Based Authentication State. Specifies whether port authentication is enabled on the
device. Select one of the following radio buttons:
– Disable. Specifies that port-based authentication is disabled.
– Enable. Specifies that port-based authentication is enabled.
• Authentication Method. Specifies the authentication method that is used for port
authentication. Port authentication must be enabled to select an authentication method
from the drop-down list. The possible field values are:
– RADIUS, None. Specifies that port authentication occurs through the RADIUS
server. However, if the port is not authenticated, then no authentication method is
used, and the session is permitted.
Configuring QoS and Security
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
5-11