NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual page 40

GS108T Smart Switch Software Administration Manual
Under Device Information, the following LLDP local information is displayed:
Note: When LLDP is disabled, all local information fields display N/A.
• Chassis ID SubType. Shows the basis for the chassis ID entity.
• Chassis ID. Shows the identifier for the particular chassis in the system.
• System Name. Shows the administratively assigned system name.
• System Description. Shows a textual description of the network entity, including the full
name and version identification of the system's hardware type.
• System Capabilities. Shows the primary functions of the system.
• Enabled Capabilities. Shows which of the primary functions are enabled.
• MED Device Type. Shows whether the device is a MED device.
• Management Address. Shows the address that is associated with the LLDP agent that can be
used to reach higher-layer entities to assist discovery by network management.
Table 3-1. Management Address
Item Description
Address Shows the type of address that is listed in the management address field.
Sub-type
Address Shows the management IP address.
Interface Shows the numbering method used for defining the interface number.
Sub-type
Interface Shows the specific address associated with the management address.
Number
OID Shows the type of hardware component or protocol entity that is associated with
the management address.
Under Port Information, the following LLDP port information is displayed:
• Port. Shows the local port number.
• Port ID SubType. Shows the basis for the identifier that is listed in the Port ID field.
• Port ID. Shows the identifier for the port from which the LLDPDU was transmitted.
• Port Description. Shows the port's description.
3-12
v1.0, December 2007
Managing System Settings