Flash Logs - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

GS108T Smart Switch Software Administration Manual
2. Perform one of the following optional actions:
• To retrieve the current count from the switch and update the screen, click Refresh.
• To reset the log, click Clear.

Flash Logs

The Flash Logs screen displays the messages that are logged in the flash memory in the way that
you have specified in
1. Select Monitoring > Log > Flash Logs. A screen similar to the following displays.
.
Figure 6-8
Under Flash Logs, the following fields are displayed:
• No. Shows the entry number for the log.
• Index. Shows the global sequence number for the log.
• Time. Shows the time when the log is recorded.
• Level. Shows the severity of the log.
• Message. Shows the detailed description of the log entry.
2. Perform one of the following optional actions:
• To retrieve the current count from the switch and update the screen, click Refresh.
• To reset the log, click Clear.
6-12
"Configuration" on page
v1.0, December 2007
6-9:
Monitoring, Maintenance, and Help