Ip Configuration - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

• IP Address. Shows the IP address of the switch.
• Subnet mask. Shows the subnet mask of the IP address.
• Default gateway. Shows the IP address of the gateway for the remote manager.
• MAC address. Shows the MAC address of the switch.
• System UpTime. Shows the switch up time after bootup.
3. Click Apply if you have made any change to the System Name, System Location, or Idle
Timeout setting.
4. View the system hardware and software version information under the Versions heading:
• Model Name. Shows the switch model name.
• Hardware Version. Shows the switch hardware version.
• Boot Version. Shows the boot code version of the switch.
• Software Version. Shows the software version of the switch.

IP Configuration

The IP Configuration screen lets you set the system IP address source and optional management
VLAN:
1. Select System > Management > IP Configuration. A screen similar to the following displays.
Figure 3-2
Managing System Settings
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
3-3