NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual page 71

2. Select a check box to specify how the table is to be queried. The possible field types are:
• Port. Specifies the interface for which the table is queried. Select an interface from the
drop-down list.
• VLAN ID. Specifies the VLAN ID for which the table is queried. Enter an existing VLAN
ID.
• MAC Address. Specifies the MAC address for which the table is queried. Enter an
existing MAC address.
3. Click Apply to query the table entries. The information that is returned from the query is
displayed as follows:
• ID. Shows the table entry ID.
• Port. Shows the interface to which the address is assigned.
• MAC Address. Shows the MAC address to which the address is assigned.
• VLAN ID. Shows the VLAN ID to which the address is assigned.
• Dynamic/Static. Shows whether the entry is dynamic or static.
Configuring Switching
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
4-27