Ip Configuration - NETGEAR GS752TP Software Administration Manual

• System Location. Enter the location of this switch. You can use up to 160
alphanumeric characters. The factory default is blank.
• System Contact. Enter the contact person for this switch. You can use up to 160
alphanumeric characters. The factory default is blank.
3. Click APPLY to apply the changes to the system.
Table 4 describes the status information displayed in the System screen.
Table 4. System status information
Field
Serial Number
System Object ID
Date & Time
System Up Time
Base MAC Address
Fan Status
Model Name
Boot Version
Software Version

IP Configuration

Use the IP Configuration screen to configure network information for the management
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch's front-panel ports. The configuration parameters associated with the
switch's network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.
To configure the network information for the management interface:

1. Select System
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Description
The serial number of the switch.
The base object ID for the switch's enterprise MIB.
The current date and time.
Displays the number of days, hours, and minutes since the last system
restart.
Universally assigned network address.
The status of fan operation.
The model name of the switch.
The boot code version of the switch.
The software version of the switch.
Management IP Configuration.
 
Configuring System Information
27