Chapter 2 Getting Started; Unpacking The Instrument; Placement; Connecting The Power - Kurzweil KME61 - REV A User Manual

Chapter 2
Getting Started
This chapter will help you hook up your KME61 and learn its basic functions.

Unpacking the Instrument

Carefully remove all of the contents of the shipping box. The box that your KME61 ships in
contains the following:
* KME61
* AC Adapter (9VAC, 2.0A)
* This manual
* Warranty card
* Four adhesive-backed rubber feet
Be sure to keep the box and packing materials, at least during the warranty period, in case
you need to ship the unit for any reason.

Placement

If you are going to be using the unit on a table now or in the future, apply the four stick-on
rubber feet to the bottom. Figure 2-1 shows the recommended locations. Remove the backing
paper from each rubber foot and attach in the recommended locations. It is possible that
these locations could interfere with some keyboard stand's supports, so check how the
KME61 fits on your stand before applying the rubber feet.
Figure 2-1

Connecting the Power

Turn the power switch (at the rear of the unit) off, then plug the power adapter into the
KME61 and into the wall.
Placement of Rubber Feet