Default Program Setup; Program Parameters; Program List - Kurzweil KME61 - REV A User Manual

Chapter 8
Reference

Default Program Setup

The Program Setup defines the MIDI characteristics of Program mode.
You also set the effects parameters for each of the 256 sounds while editing the Program.

Program Parameters

Below is a list of the parameters and default values for the Program Mode. The shaded
parameters are not available in Program mode.The default values of the effects parameters
vary according to which sound is selected.
ZONE 1
Sound Group and Program - According to sound selected
Key Range Low - C2
Key Range High - C6
Vel. Range Low - 1
Vel. Range High - 127
Note Shift - Initially 0 then as edited
Volume - 127
FXA Level - According to sound selected then as edited
FXB Level - According to sound selected then as edited
MIDI Channel - Initially 1 then as edited
MIDI Program - According to sound selected
MIDI Bank - According to sound selected
Zone Mutes - On
FX Type - According to sound selected

Program List

Below is a list of the 256 sounds (Programs) available from the internal sound module. The
list includes the control assignment and the factory default effects setting for each sound.
ZONE 2 ZONE
None None
- -
- -
- -
- -
- -
- -
- -
None None
None None
None None
Off Off