Kurzweil KME61 - REV A User Manual page 25

Select a User Setup:
OK
At this point the 16 User Setup buttons will light as follows:
Off - User Setup slots that are currently ʺemptyʺ (have default setup).
On - User Setup slots that have previously been saved to.
Flashing - The currently selected setup if it is a user setup.
Now only the left and right soft buttons and the User Setup Select buttons will be recognized
as follows:
Cancel - Return to the previous edit page.
User Setup - When pressed, that button's LED will begin to flash. If another button's LED was
flashing, it will either turn off or stop flashing according to its previous use status.
OK - The edited setup will be saved to the User Setup slot with the flashing LED.
Thus if you simply want to update the current user setup, the left soft button would just be
pressed twice.
Save to User Setup
X
After the save operation, a confirmation screen is displayed briefly then the Setup Base page
is displayed as originally requested.
Cancel
Setup Mode
4-7