Oki CX1145 MFP User Management Manual page 13

1 Setting up User Management
7
Enter domain names for the network in the Domain Name 1, Domain
Name 2 and Domain Name 3 fields, and then click [Detail Setting].
You can specify up to 3 domain names. You must specify at least one domain name to
enable the Windows Domain Authentication.
8
Click [NT Domain], and Enter the following items. Then click [Next].
Domain Name — The domain name entered in Step 7 is displayed.
PDC — Enter the server name or IP address of the Primary Domain Controller.
BDC — Enter the server name or IP address of the Backup Domain Controller as you
required.
If the wrong primary or backup domain controller is specified, the [ENTER] button in the
USER AUTHENTICATION screen on the touch panel is highlighted while this equipment
searches for the primary or backup domain controller for 2 to 4 minutes. In that case,
correct the primary or backup domain controller setting after the beep will sound and the
alert message will be displayed on the touch panel.
12 Setting up User Management Setting