Setting Up User Authentication For Scan To E-Mail - Oki CX1145 MFP User Management Manual

1 Setting up User Management

Setting up User Authentication for Scan to E-mail

When the User Authentication for Scan to Email is enabled, users must enter the user name and
password before performing Scan to E-mail.
You can select either the SMTP or LDAP for User Authentication for Scan to Email.
SMTP Authentication
This equipment can be managed using the SMTP Authentication.
When this is configured, users must enter the user name and password that is registered in
the SMTP server to perform Scan to E-mail on the Control Panel of this equipment.
P.44 "Enabling User Authentication for Scan to Email (SMTP)"
LDAP Authentication
When your network manages the network users using the LDAP, this equipment can be
managed using the LDAP Authentication.
When this is configured, users must enter the user name and password that is registered in
the LDAP server to perform Scan to E-mail on the Control Panel of this equipment.
P.47 "Enabling User Authentication for Scan to Email (LDAP)"
When the User Authentication for Scan to Email is enabled, the Email Notification may not be
sent to the administrator. Please make sure to set the login name and password in the SMTP
Client settings.
Enabling User Authentication for Scan to Email (SMTP)
1
Click the User Management tab and the Authentication menu.
The login page is displayed.
2
Enter the administrator password and click [Login].
The Authentication page is displayed.
44

Setting up User Authentication for Scan to E-mail