Dell PowerConnect M6348 Configuration Manual page 58

Example #11: Show Group Configuration Summary
Use the show port-aggregator group summary [< GroupId >] command to show the parameters
configured on the aggregator group.
specified, the command shows all the configured parameters for all the Groups.
console#show port-aggregator group summary 2
Group VLANs
----- -----
2 4023
console#show port-aggregator group summary
Gid VLANs
--- -----
1 4086
2 4087
3 4088
4 4089
Example #12: Show Port Summary
Use the show port-aggregator [group < GroupId >] command to show the member ports in the
<Group Id>
aggregator group.
command shows all the Groups and member ports.
console#show port-aggregator port summary 2
Group Member Ports
----- ------------
2 1/xg2,1/xg6,
1/xg10,1/xg14,
1/xg18
console#show port-aggregator port summary
Gid Member Ports
----- ----------------------
1 1/xg2-1/xg16,1/xg18-1/xg20
2 1/xg1,1/xg17,
3 Not configured
4 Not configured
58
Switching Configuration
<Group Id>
Uplinks MTU
------- -------
1 Default
Minimum MTU
Uplinks
------- -------
1 Disabled
1 Disabled
1 Disabled
1 Disabled
is an optional parameter in the command and, if not specified, the
Active
Member Ports
------------
1/xg2,1/xg6,
1/xg10,1/xg14,
1/xg18
is an optional parameter in the command and, if not
Negotiation Speed
----------- ------
Default Default
Negotiation Speed
----------- -------
Default Default
Default Default
Default Default
Default Default
Configured
LACP Mode
----------
static
Active Configured
Member Ports LACP Mode
---------- ---------
Dynamic
1/xg17 Dynamic
Dynamic
Dynamic
Duplex
------
Default
Duplex
-------
Default
Default
Default
Default
Current
LACP Mode
---------
auto
Current
LACP Mode
---------
Dynamic
Dynamic
Dynamic
Dynamic