Dell PowerConnect M6348 Configuration Manual page 20

SNMP Set Command Logging : disabled
0 Messages were not logged.
Buffer Log:
<189> JAN 01 03:57:58 10.27.65.86-1 TRAPMGR[216282304]: traputil.c(908) 31 %%
Instance 0 has elected a new STP root: 8000:00ff:f2a3:8888
<189> JAN 01 03:57:58 10.27.65.86-1 TRAPMGR[216282304]: traputil.c(908) 32 %%
Instance 0 has elected a new STP root: 8000:0002:bc00:7e2c
<189> JAN 01 04:04:18 10.27.65.86-1 TRAPMGR[231781808]: traputil.c(908) 33 %% New
Spanning Tree Root: 0, Unit: 1
<189> JAN 01 04:04:18 10.27.65.86-1 TRAPMGR[216282304]: traputil.c(908) 34 %% The
unit 1 elected as the new STP root
Example #2: Viewing the Logging File
console#show logging file
Persistent Logging
Persistent Log Count
Example #5: Configuring Syslog Server
console(config)#logging ?
buffered
cli-command
console
facility
file
on
snmp
web-session
<ip-address|hostname>
console(config)#logging 192.168.10.65
console(Config-logging)#?
description
exit
level
port
console(Config-logging)#level ?
alert
critical
debug
emergency
20
System Configuration
: disabled
: 0
Buffered (In-Memory) Logging Configuration.
CLI Command Logging Configuration.
Console Logging Configuration.
Syslog Facility Configuration.
Configure logging file parameters.
Enable logging to all supporting destinations.
SNMP Set Command Logging Configuration.
Web Session Logging Configuration.
Configure syslog server IP address or Hostname up to
63 characters in length
Specify syslog server description.
To exit from the mode.
Specify logging level.
Specify UDP port (default is 514).
Immediate action needed
Critical conditions
Debugging messages
System is unusable