Simple Switch Mode Supported Cli Commands - Dell PowerConnect M6348 Configuration Manual

Simple Switch Mode Supported CLI Commands

Commands that were available in Interface mode of Normal switch mode are now available in Simple mode
and can execute on a Port Aggregator group. For example, to apply any of the following commands on an
aggregator group 1, enter the port configuration mode for that group:
console(config)#port-aggregator group 1
console(config-aggregator-1)#
The following commands that are available in Normal switch mode are also available in Simple mode.
These are existing commands that are documented in the
PowerConnect switch.
• AAA commands:
aaa authentication enable
aaa authentication login
enable authentication
enable password
ip http authentication
ip https authentication
login authentication
password (Line Configuration)
password (User EXEC)
show authentication methods
show user accounts
show users login history
username
• Configuration and Image File Commands:
boot system
clear config
copy
delete backup-config
delete backup-image
delete startup-config
filedescr
script apply
script delete
script list
script show
script validate
show backup-config
show bootvar
show running-config
show startup-config
update bootcode
CLI Command Reference
Switching Configuration
for your
59