Dell PowerConnect M6348 Configuration Manual page 124

Max Input Octets (bytes)....................... 0
Max Output Octets (bytes)...................... 0
Max Total Octets (bytes)....................... 0
To create a local user, use the following command:
console(Config-CP)#user 1 name user1
console(config-CP)#user 1 password
Enter password (8 to 64 characters): ********
Re-enter password: ********
console(Config-CP)#user 1 session-timeout 14400
To verify the creation of a local user, use the following command:
console#show captive-portal user
User ID User Name
------- ------------------- -------
1 user1
Example 8: Associate an Interface with a Captive Portal Configuration
To associate an interface with a Captive Portal configuration, use the following command:
console#configure
(Config)#captive-portal
(Config-CP)#configuration 1
console(Config-CP 1)#interface 1/g18
To view the new interface, use the following command:
console#show captive-portal configuration 1 interface
CP ID.......................................... 1
CP Name........................................ Default
Interface Interface Description
--------- --------------------------------
1/g18 Unit: 1 Slot: 0
Port: 18 Gigabit - Level
To view the status of a captive client (connected to 1/g18), use the following command:
console#show captive-portal configuration 1 client status
124
Device Security
Session Idle
Timeout Timeout
--------
14400 0
Operational
Status
-----------
Disabled
Group ID Group Name
-------- ----------
1 Default
Block
Status
------
Not Blocked