System Configuration; Traceroute - Dell PowerConnect M6348 Configuration Manual

System Configuration

This section provides configuration scenarios for the following features:
• "Traceroute" on page 11
• "Configuration Scripting" on page 13
• "Outbound Telnet" on page 16
• "Simple Network Time Protocol (SNTP)" on page 17
• "Syslog" on page 19
• "Port Description" on page 21
• "Storm Control" on page 21
• "10GBASE-T Plug-in Module Configuration" on page 23
NOTE:
For information on setting up the hardware and serial or TFTP connection, refer to the
Guide
for your system.

Traceroute

Use Traceroute to discover the routes that packets take when traveling on a hop-by-hop basis to their
destination through the network.
• Maps network routes by sending packets with small Time-to-Live (TTL) values and watches the
ICMP time-out announcements
• Command displays all L3 devices
• Can be used to detect issues on the network
• Tracks up to 30 hops
• Default UDP port uses 33434 unless modified in the traceroute command
Getting Started
System Configuration
2
11