Authentication; Imaging - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS ADAPTATIVE AGENT GUIDE 10.3 30-03-2010 Information Manual

Hide thumbs Also See for ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS ADAPTATIVE AGENT GUIDE 10.3 30-03-2010:
Table of Contents

Advertisement

2 In the left navigation pane, under Satellite, click General.
Field
Current Status
Port
SSL Port
Satellite Role Status
Content Replication
Details

8.2 Authentication

You can view a device's Authentication role properties, including its current status and the SSL port
currently used for authentication; however, you cannot edit the fields on this page.
ZENworks
Authentication role on a device. With this role, the device can be used as an Authentication server to
help speed the authentication process by spreading the workload among various devices and by
performing authentication locally to managed devices.
To view Authentication role information:
1 Double-click the
2 In the left navigation pane, under Satellite, click Authentication.
Field
Current Status
SSL Port

8.3 Imaging

You can view a device's imaging role properties, including its current status, PXE service status,
image files, and imaging statistics; however, you cannot edit the fields on this page.
32
Novell ZENworks 10 Configuration Management Adaptive Agent Guide
Description
Displays whether your device is currently configured to perform a
satellite role.
Displays the port that the device is using.
If the device is performing the Authentication role, displays the SSL port
being used for authentication purposes.
Displays the roles that the device is performing (Collection, Content,
Imaging, and Authentication) and its current status.
Displays the content type, throttle rate (kb/sec) that the device uses to
replicate content, how often the device's content is updated from the
parent Primary Server, and the duration of the replication period. Your
system administrator can change any of these settings.
For example, by default, a Content role device checks for new or
removed content every 5 minutes. Your ZENworks administrator can
change this schedule. For example, your administrator might want to
increase the time between cycles if the ZENworks system is not adding
content to your system very often or if the connection between the
Content role device and its parent Primary Server is slow.
®
Configuration Management lets your ZENworks administrator enable the
icon in the notification area.
Description
Displays whether your device is currently configured to perform
Authentication operations. The current status is Active when the device
is promoted to a satellite with the Authentication role.
Specifies the SSL port being used on the device for authentication
purposes.

Advertisement

Table of Contents
loading

Table of Contents