Registering With A Key - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS ADAPTATIVE AGENT GUIDE 10.3 30-03-2010 Information Manual

2.2 Registering with a Key

Your device
ZENworks
registration keys. A registration key is alphanumeric string that you optionally supply to the
ZENworks Adaptive Agent during registration of the device in order to automatically be assigned
bundles and policies associated with the key.
Your administrator might provide you with a key and ask you to register (or reregister) your device.
To do so:
1 Double-click the
2 In the left navigation pane, click Status.
3 In the Registration Keys field, type the registration key, then click Register.
The Adaptive Agent registers the device using the key you supplied.
Registration keys are cumulative, which means that when you register with more than one key,
the device receives the bundles, policies, and group assignments associated with each of the
keys. Each key used for registration is added to the list for future reference.
If you add a registration key to a device that is already registered in the Management Zone with
another key, and both keys specify a folder for the device, the new key does not move the
device to the folder specified by the new key.
To move a device to another folder, in ZCC, click the Devices tab, click Servers or
Workstations, click the check box next to the device that you want to move, click Edit, click
Move, click the desired folder, then click OK. Moving a device by using the ZCC retains the
device's existing assignments. You can also unregister then register the device, however, its
existing assignments are removed.
12 Novell ZENworks 10 Configuration Management Adaptive Agent Guide
must be registered in the Management Zone in order to be managed through
®
Configuration Management. To facilitate this process, your administrator can create
icon in the notification area.