3 At the boot screen, select Installation.
4 Select the language and click Next.
5 Confirm the license agreement and click Next.
6 In System Analysis, select Other > Repair Installed System.
7 Select Automatic Repair.
Figure 51.2 Automatic Repair Mode
942
Installation and Administration
YaST now launches an extensive analysis of the installed system. The progress
of the procedure is displayed at the bottom of the screen with two progress bars.
The upper bar shows the progress of the currently running test. The lower bar
shows the overall progress of the analysis. The log window in the top section
tracks the currently running test and its result. See Figure 51.2, "Automatic Repair
Mode" (page 942). The following main test runs are performed with every run.
They contain, in turn, a number of individual subtests.
Partition Tables of All Hard Disks
Checks the validity and coherence of the partition tables of all detected hard
disks.
Need help?
Do you have a question about the LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION and is the answer not in the manual?
Questions and answers