Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 113

Keyword
netmask
gateway
nameserver
autoyast
install
vnc
vncpassword
usessh
If your autoinstallation scenario involves client configuration via DCHP and a network
installation source and you want to monitor the installation process using VNC, your
info would look like this:
autoyast:profile_source install:install_source vnc:1 vncpassword:some_password
If you prefer a static network setup at installation time, your info file would look like
the following:
autoyast:profile_source \
install:install_source \
hostip:some_ip \
netmask:some_netmask \
gateway:some_gateway
The \ indicate that the line breaks have only been added for the sake of readability. All
options must be entered as one continuous string.
Value
Netmask.
Gateway.
Name server.
Location of the the control file to use for the automatic
installation, such as
autoyast=http://192.168.2.1/profiles/.
Location of the installation source, such as
install=nfs://192.168.2.1/CDs/.
If set to 1, enables VNC remote controlled installation.
The password for VNC.
If set to 1, enables SSH remote controlled installation.
Automated Installation 95