Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 590

5 In the General tab, set the Firewall Zone and Device Activation. With User
6 Click Next.
7 To activate the new network configuration, click Finish.
Information about the conventions for configuration names is available in the
getcfg(8) man page.
30.4.2 Modem
TIP: IBM System z: Modem
The configuration of this type of hardware is not supported on IBM System z
platforms.
In the YaST Control Center, access the modem configuration with Network Devices >
Modem. If your modem was not automatically detected, open the dialog for manual
configuration by clicking Add. In the dialog that opens, enter the interface to which the
modem is connected for Modem Device.
TIP: CDMA and GPRS Modems
Configure supported CDMA and GPRS modems with the YaST modem module
just as you would configure regular modems.
572 Installation and Administration
name server, and routing details (see Section "Configuring Hostname and DNS"
(page 568) and Section "Configuring Routing" (page 569)).
If you selected Wireless as the device type of the interface, configure the wireless
connection in the next dialog. Detailed information about wireless device confi-
guration is available in Section 29.1, "Wireless LAN" (page 533).
Controlled, grant connection control to ordinary users.