Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 304

iSNS can also be configured to start automatically each time the server is rebooted. To
do this
1 Start YaST and under Network Services, select iSNS Server.
2 With the Service tab selected, specify the IP address of your iSNS server, then
3 In the Service Start section of the screen, select When Booting.
13.3.1 Creating iSNS Discovery Domains
In order for iSCSI initiators and targets to use the iSNS service, they must belong to a
discovery domain. A default discovery domain named default DD is automatically
created when you install the iSNS service. The existing iSCSI targets and initiators that
have been configured to use iSNS are automatically added to the default discovery do-
main.
To create a new discovery domain:
1 Start YaST and under Network Services, select iSNS Server.
2 Click the Discovery Domains tab, then click the Create Discovery Domain button.
3 Specify the name of the discovery domain you are creating, then click OK.
13.3.2 Creating iSNS Discovery Domain Sets
Discovery domains must belong to a discovery domain set. You can create a discovery
domain and add nodes to that discovery domain, but it is not active and the iSNS service
does not function unless you add the discovery domain to a discovery domain set. A
default discovery domain set named default DDS is automatically created when you
286 Installation and Administration
click Save Address.
You can also choose to start the iSNS server manually. You must then use the
rcisns start command to start the service each time the server is restarted.
You can also select an existing discovery domain and click the Delete button to
remove that discovery domain.