For More Information - Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual

4 Click Add existing iSCSI Node, select the node you want to add to the domain,
5 Repeat the last step for as many nodes as you want to add to the discovery domain,
13.3.4 Adding Discovery Domains to a
1 Start YaST and under Network Services, select iSNS Server.
2 Click the Discovery Domains Set tab.
3 Select Create Discovery Domain Set to add a new set to the list of discovery
4 Choose a discovery domain set to modify.
5 Click Add Discovery Domain, select the discovery domain you want to add to
6 Repeat the last step for as many discovery domains as you want to add to the

13.4 For More Information

The linuxisns project is hosted at
linuxisns/. The Mailinglist for this project is found at
.net/mailarchive/forum.php?forum_name=linuxisns-discussion.
General information about iSNS was written down in rfc4171. See also
www.ietf.org/rfc/rfc4171.
288 Installation and Administration
then click Add Node.
then click Done when you are finished adding nodes.
An iSCSI node can belong to more than one discovery domain.
Discovery Domain Set
domain sets.
the discovery domain set, then click Add Discovery Domain.
discovery domain set, then click Done.
A discovery domain can belong to more than one discovery domain set.
http://sourceforge.net/projects/
http://sourceforge
http://