Changing The Openwbem Cimom Configuration - Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual

This means that owcimomd logging is set up to go to the /var/log/messages file
or to other files depending on the configuration of syslogd. It logs all errors for all
components (owcimomd).
11.2 Changing the OpenWBEM
When OpenWBEM CIMOM (owcimomd) starts, it reads it run-time configuration from
the openwbem.conf file. The openwbem.conffile is located in the /etc/
openwbem directory.
Any setting that has the options commented out with a semicolon (;) or pound sign (#)
uses the default setting.
When making changes to this file, you can use any text editor that saves the file in a
format that is native to the platform you are using.
You can change any of the settings in the openwbem.conf file. This section discusses
the following configuration settings:
• Section 11.2.1, "Changing the Authentication Configuration" (page 249)
• Section 11.2.2, "Changing the Certificate Configuration" (page 256)
• Section 11.2.3, "Changing the Port Configuration" (page 257)
• Section 11.2.4, "Changing the Default Logging Configuration" (page 258)
• Section 11.2.5, "Configuring Debug Logging" (page 266)
• Section 11.2.6, "Configuring Additional Logs" (page 268)
248 Installation and Administration
CIMOM Configuration