8.9.5 Firewall
SuSEfirewall2 can protect your machine against attacks from the Internet. Configure
it with Security and Users > Firewall. Find detailed information about SuSEfirewall2
in Chapter 43, Masquerading and Firewalls (page 823).
TIP: Automatic Activation of the Firewall
YaST automatically starts a firewall with suitable settings on every configured
network interface. Start this module only if you want to reconfigure the firewall
with custom settings or deactivate it.
8.10 Virtualization
Virtualization makes it possible to run several operating systems on one physical ma-
chine. The hardware for the different systems is provided virtually. Virtualization YaST
modules provide configuration for the Xen virtualization system. For more information
about this technology, see the virtualization manual on
documentation/sles10/index.html..
The following modules are available in the Virtualization section:
Installing Hypervisor and Tools
Before you start using Xen, install a kernel with Xen support and related tools. To
install them, use Virtualization > Install Hypervisor and Tools. After installation
reboot your system to use the Xen kernel.
Creating Virtual Machines
After you successfully installed the Xen hypervisor and tools, you can install virtual
machines on your virtual server. To install a virtual machine, use Virtualization >
Create Virtual Machines.
http://www.novell.com/
System Configuration with YaST
181