Managing Groups; Adding A Group To A Connector - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

4.3 Managing Groups

During installation of the Mobility Pack, you specified one LDAP group container and added groups
from that container. After installation, you might have configured Synchronizer Web Admin to
search additional LDAP containers for groups, as described in
LDAP Contexts for Users and Groups," on page
any LDAP container that Synchronizer Web Admin has been configured to search.
Section 4.3.1, "Adding a Group to a Connector," on page 38
Section 4.3.2, "Deleting a Group," on page 39

4.3.1 Adding a Group to a Connector

If you are adding the group to the GroupWise Connector and the Mobility Connector, add the user to
the GroupWise Connector first.
1 In Synchronizer Web
2 Click Add Groups to Connector.
3 Click Search to list the groups in LDAP containers that Synchronizer Web Admin has been
configured to search.
You can configure Synchronizer Web Admin to search additional containers for groups, as
described in
page 15.
or
In the Search Groups field, type part of the group name, then click Search.
4 Select the group to add to the connector.
38 Novell Data Synchronizer Administration Guide
Admin, click the connector, then click Groups.
Section 3.1.1, "Searching Multiple LDAP Contexts for Users and Groups," on
Section 3.1.1, "Searching Multiple
15. Now you can add groups to a connector from