Controlling Connector Startup; Configuring Connector Filters - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

Section 4.5.2, "Configuring Connector Filters," on page 40
Section 4.5.3, "Controlling Connector Logging," on page 41

4.5.1 Controlling Connector Startup

By default, connectors must be started manually whenever you restart the Synchronizer services.
For convenience, you can configure connectors to start automatically whenever you restart the
Synchronizer services.
1 In Synchronizer Web
for.
2 (Conditional) If necessary for the selected connector, scroll down to the Connector Startup
section.
3 Select Automatic so that the connector starts automatically whenever you restart the
Synchronizer services.
4 Click Save Connector Startup.
5 Click Home on the menu bar to return to the main Synchronizer Web Admin page.
6 In the Actions column for the selected connector, click
to start the connector with the new startup setting.

4.5.2 Configuring Connector Filters

The connector filters are the mechanism by which data formatted for one application is transformed
into application-neutral format for processing by the Sync Engine, then customized for use by a
different connector. The default filters are appropriate for typical Synchronizer systems, but they can
be edited if necessary.
1 In
Synchronizer Web
2 (Conditional) If necessary for the selected connector, scroll down to the Filters section.
40 Novell Data Synchronizer Administration Guide
Admin, click the connector that you want to change the startup setting
Admin, click the connector that you want to edit the filters for.
to stop the connector, then click