3.4.6 Per-User Log Files
Per-user log files (
user_distinguished_name.log
having. Per-user logging is disabled by default. To enable it, see
Logging," on page
21.
3.4.7 Flatfile Connector Troubleshooting
When data does not synchronize as expected, it can be challenging to determine which component in
your Synchronizer system is the source of the problem.You can set up a Flatfile Connector to
capture the data files that contain data from one application to see how that data is flowing through
your Synchronizer system. For example, if data is not synchronizing successfully between
GroupWise and a user's mobile device, you can set up a Flatfile Connector to determine where the
problem lies.
"Adding a Flatfile Connector" on page 27
"Troubleshooting Data Flow with the Flatfile Connector" on page 28
Adding a Flatfile Connector
1 In
Synchronizer Web
2 Specify a name for the Flatfile Connector, then click Add Connector.
The Connector Type field defaults to
3 Click the Flatfile Connector to display the Connector Configuration page.
Admin, click Add Connector.
flatfile
) report on problems that a specific user is
Section 3.2.3, "Enabling Per-User
.
Managing Your Synchronizer System
27