Configuring Postal Address Attribute Maps - Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual

2 Specify a name and description for the map.
3 Choose the type of access rights you want.
Select Read/Write for any attributes used in user provisioning.
4 In the LDAP Attribute Name field, type the LDAP attribute name that you want to map to the
Liberty Employee Status element.
5 In the LDAP Attribute Value fields, type the predefined LDAP attribute values that you want to
map to the Liberty Employee Status values.
These are the values that you want to store in the LDAP attribute for each given Liberty
attribute value. The LDAP attribute map then maps the actual Liberty URI value, back and
forth, to this supplied value.
6 Click Finish.
7 On the LDAP Attribute Mapping page, click OK.
8 Update the Identity Server configuration on the Servers page as prompted.

10.9.4 Configuring Postal Address Attribute Maps

You can map the LDAP attribute name and values to the Liberty profile values for Postal Address.
The PostalAddress element refers to the local address, including street or block with a house
number, and so on. This is a Personal Profile attribute.
1 In the Administration Console, click Devices > Identity Servers > Edit > Liberty > LDAP
Attribute Mapping > New > Postal Address.
240 Novell Access Manager 3.1 SP1 Identity Server Guide