Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual page 130

2 Specify a Display name (for example,
3 Enter a URI (for example,
The URI is used to identify this contract for external providers and is a unique path value that
you create.
4 In the Available methods list, select the method created in
NMAS Class" on page
All other fields can remain in the default state.
5 Click Next, then configure a card for the contract by filling in the following fields:
ID: (Optional) Specify an alphanumeric value that identifies the card. If you need to reference
this card outside of the Administration Console, you need to specify a value here. If you do not
assign a value, the Identity Server creates one for its internal use.
Text: Specify the text that is displayed on the card to the user, for example Smart Card.
Image: Select the image to display on the card. We recommend that you select the Select local
image option and upload an image that your users can associate with using this smart card
authentication contract.
Show Card: Determine whether the card is shown to the user, which allows the user to select
and use the card for authentication. If this option is not selected, the card is only used when a
service provider makes a request for the card.
6 Click Finish, then click OK.
7 Update the Identity Server.
8 Update the Access Gateway.
9 Continue with
page 131
130 Novell Access Manager 3.1 SP1 Identity Server Guide
Contract-NMAS-NESCM-UserStore1
nescm/test/uri
128, then click the left-arrow to move this method into the Methods list.
Section 3.5.4, "Assigning the NESCM Contract to a Protected Resource," on
).
"Creating a Method to Use the
).