Creating And Installing A Managed Card - Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual

Image: Specify the image to be displayed on the card. Select the image from the drop-down
list. To add an image to the list, click Select local image. The default image is the Novell Card.
Require Identification of Relying Party in Security Token: Select this option to require the
relying party to provide identification when it requests a security token. For this scenario, do
not enable this option because the instructions haven't explained how to configure this option
for the relying party.
Allow Users to Back a Managed Card Using a Personal Card: Select this option to allow
users to back a managed card with a personal card. If this option is not selected, you cannot
complete the steps in
Card," on page 178.
3 Click Next, then fill in the following fields:
Attribute set: From the list of available sets, select the CardSpace attribute set.
Selected claims: From the list of available claims, select the attributes for the managed card
and move them to the list of selected claims.
Do not remove the Personal Private Identifier claim. Add the Common First Name claim.
4 Click Finish.
5 Click STS > Authentication Methods.
6 Move the Secure Name/Password - Form method to the Methods list.
7 Click OK.
8 Update the Identity Server.
9 Continue with Section 6.4.3, "Creating and Installing a Managed Card," on page 175

6.4.3 Creating and Installing a Managed Card

The following instructions assume you are on a Windows client. The procedure is very similar to
what is required on a Linux client and should be easily adapted.
1 In Internet Explorer on the client machine, enter the base URL of the Identity Server acting as
the identity provider.
2 Select the Secure Name/Password card, then log in to the Identity Server.
3 Click New Card, then click the Managed Card Template.
The card displays the required claims.
4 Specify a name for the card, then click Create Card.
5 Click Open.
CardSpace opens.
6 Click Install and Exit.
The managed card is installed.
7 Log out and close the browser.
8 Continue with
Section 6.4.4, "Configuring the Relying Party to Trust an Identity Provider," on
page 176.
Section 6.5, "Authenticating with a Managed Card Backed by a Personal
Configuring CardSpace 175