Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual page 154

Figure 5-5
Identity Server
Site A
Identity Provider: A
DNS: idp.sitea.novell.com
In this example, Site Z places links on its Web page, using the Intersite Transfer Service URL of Site
A. These links trigger authentication at Site A. If successful, Site A sends an assertion to Site B. Site
B verifies the authentication and redirects the user to the myapp application that it is protecting.
Configuring an Intersite Transfer Service Target for a Service Provider
If you have created Web pages that have links that specify a Intersite Transfer Service URL (see
"Using Intersite Transfer Service Links on Web Pages" on page
Server control the TARGET parameter.
1 Click Devices > Identity Servers > Edit > [Liberty, SAML1.1, or SAML 2.0] > [Service
Provider] > Intersite Transfer Service.
2 Fill in the following:
ID: (Optional) Specify an alphanumeric value that identifies the target. If you need to reference
the target outside of the Administration Console, you need to specify a value here. If you do not
assign a value, the Identity Server creates one for its internal use.
Target: Specify the URL of the page that you want to display to users when they authenticate
using an Intersite Transfer URL.The behavior of this option is influenced by the Allow any
target option.
Allow any target: If this option is selected, the user can use the target that was specified in the
Intersite Transfer URL. If this option is not selected, the target value in the Intersite Transfer
URL is ignored and the user is sent to URL specified in the Target option.
3 Click OK twice.
4 Update the Identity Server.
154 Novell Access Manager 3.1 SP1 Identity Server Guide
Using the Intersite Transfer Service URL
Identity Server
Identity Provider: B
Service Provider: 1
DNS: idp.siteb.novell.com
Third-Party Server
Site Z
Site B
Access Gateway
URL: https://eng.provo.novell.com/myapp
Service Provider: 2
DNS: eng.provo.novell.com
Web Server
153), you can have the Identity