Modifying The Authentication Card; Modifying A Ws Federation Service Provider; Renaming The Service Provider; Configuring The Attributes Sent With Authentication - Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual

7.3.5 Modifying the Authentication Card

When you create an identity provider, you must also configure an authentication card. After it is
created, you can modify it.
1 In the Administration Console, click Devices > Identity Servers > Edit > WS Federation >
[Identity Provider] > Authentication Card.
2 Modify the values in one or more of the following fields:
ID: If you have need to reference this card outside of the Administration Console, specify an
alphanumeric value here. If you do not assign a value, the Identity Server creates one for its
internal use. The internal value is not persistent. Whenever the Identity Server is rebooted, it
can change. A specified value is persistent.
Text: Specify the text that is displayed on the card. This value, in combination with the image,
indicates to the users the provider they are logging into.
Image: Specify the image to be displayed on the card. Select the image from the drop-down
list. To add an image to the list, click <Select local image>.
Show Card: Determine whether the card is shown to the user, which allows the user to select
and use the card for authentication. If this option is not selected, the card is only used when a
service provider makes a request for the card.
3 Click OK twice, then update the Identity Server.

7.4 Modifying a WS Federation Service Provider

This section explains how to modify a WS Federation service provider after it has been created.
Section 7.1, "Using the Identity Server as an Identity Provider for ADFS," on page 187
steps required to create the service provider.
Section 7.4.1, "Renaming the Service Provider," on page 206
Section 7.4.2, "Configuring the Attributes Sent with Authentication," on page 206
Section 7.4.3, "Modifying the Authentication Response," on page 207
Section 7.4.4, "Managing the Metadata," on page 208

7.4.1 Renaming the Service Provider

1 In the Administration Console, click Devices > Identity Servers > Edit > WS Federation >
[Service Provider].
2 In the Name field, specify a new name for the service provider.
3 Click OK twice, then update the Identity Server.

7.4.2 Configuring the Attributes Sent with Authentication

When the Identity Server creates its response for the service provider, it uses the attributes listed
here. The response needs to contain the attributes that the service provider requires. If you do not
own the service provider, you need to contact the administrator of the service provider and negotiate
206 Novell Access Manager 3.1 SP1 Identity Server Guide
explains the