3 Select the profile option for the managed card.
4 When the CardSpace application opens, select the managed card you imported, then click Send.
5 In the CardSpace application, enter the password for the user, then click OK.
6 When prompted by the Identity Server, enter the name and password.
On subsequent logins, CardSpace prompts you for a password, but the Identity Sever uses the
card for authentication. For single sign-on with the managed card, you need to back it with a
personal card. Continue with
Personal Card," on page
Managed cards can be used to access resources protected by the Access Gateway. For
configuration information, see
Access Gateway Protected Resources," on page
6.5 Authenticating with a Managed Card Backed
by a Personal Card
The following configuration assumes that you have completed the configuration steps for
Section 6.4, "Authenticating with a Managed Card," on page 174
Users to Back a Managed Card Using a Personal Card option. This configuration scenario uses the
managed card that you have created and explains how to install a new instance of it and back it with
a personal card.
1 In a browser on the client machine, enter the base URL of the Identity Server acting as the
identity provider.
2 Select the Secure Name/Password card, then log in to the Identity Server.
3 Click New Card, then click the Managed Card Template.
4 Specify a name for the card, then enable the Use Personal Card For Authentication option.
5 When CardSpace opens, select a personal card, then click Send.
6 On the New Card page, click Create Card.
7 Click Open.
CardSpace opens.
8 Click Install and Exit.
The managed card backed by a personal card is installed.
9 Log out and close the browser.
10 In the browser, enter the base URL of the Identity Server acting as the relying party.
11 Select the CardSpace card.
178 Novell Access Manager 3.1 SP1 Identity Server Guide
Section 6.5, "Authenticating with a Managed Card Backed by a
178.
Section 6.8, "Using CardSpace Cards for Authentication to
186.
and that you enabled the Allow
Need help?
Do you have a question about the ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER and is the answer not in the manual?