Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual page 93

2 Click one of the predefined authentication methods, or click New to create one.
3 Fill in the following fields:
Display Name: The name to be used to refer to the new method.
Class: The authentication class to use for this method. See
Authentication Classes," on page
Identifies User: Specifies whether this authentication method should be used to identify the
user. Usually, you should enable this option. When configuring multiple methods for a contract,
you might need to disable this option for some methods.
If you enable this option on two or more methods in a contract, these methods need to identify
the same user in the same user store.
If you enable this option on just one method in the contract, that method identifies the user
when the authentication method succeeds. The other methods in the contract must succeed, but
might not authenticated the user. For example, the method that identifies the user could require
a name and a password for authentication, and the other method in the contract could prompt
for a certificate that identifies the user's computer.
4 Add user stores to search.
You can select from the list of all the user stores you have set up. If you have several user
stores, the system searches through them based on the order specified here. If a user store is not
moved to the User stores list, users in that user store cannot use this method for authentication.
<Default User Store>: The default user store in your system. See
Authentication Defaults," on page
5 (Optional) Under Properties, click New, then fill in the following fields:
88.
98.
Section 2.2, "Creating
Section 2.6, "Specifying
Configuring Local Authentication 93