Maintenance - Diamondback FITNESS 900ER Owner's Manual

The LED lamp above the DATA DISPLAY key will be lit indicating the information currently displayed in the
Messaging/Data Display window is Time, Level, Pulse and Calories. Pressing the DATA DISPLAY button once will light the
LED lamp below the key to indicate RPM, Speed, Distance and Watts are being displayed in the Messaging/Data Display
window.
Messages or feedback for the user will periodically flash and scroll in the Messaging/Data Display window. Directions
such as "Speed Up" or "No Heart Rate Detected. Check Your Pulse Sensor" will ensure a productive workout.
Adjustment of the resistance level is controlled by the console.
Pressing STOP/START‐QUICK START twice while in the main program will restart the program.
Ending a Heart Rate Control Program
When the program time has elapsed or the STOP/START‐QUICK START key is pressed, the Cool Down program will launch,
followed by the Workout Summary display. Refer to the section titled PROGRAMMING FEATURES ‐ Cool Down and Workout
Summary for more information.
Press and hold the STOP/START‐QUICK START for two (2) seconds to reset the console and return to the Idle mode.
See the section entitled Operating Notes (page 26) for more information regarding the Pause, Reset and Program Reset
functions.
MAINTENANCE
All Diamondback Fitness products are engineered for years of near‐silent operation. Let noise be your first indication that a
repair or adjustment is required. Please, discontinue use immediately and contact an Authorized Service Technician or
Diamondback Fitness Dealer if an unusual noise, scraping, knocking, grinding or vibration is detected. Often, a minor issue will
become a major repair if ignored and use is continued.
Prior to each workout, confirm that all adjustment levers and screws are tightened.
Your Diamondback Fitness 900Er is manufactured of the most durable materials available. The plastics are molded of strong and
chemical‐resistant ABS and PVC. The frame is produced of high‐tensile steel and protected with an industrial‐grade, powder
paint coating for the highest level of corrosion resistance. It is important to note however, that perspiration can be extremely
44