Table of Contents
Advertisement
2-5-4 AGP Slot
This motherboard provides an AGP Slot, support the 1X/2X/4X AGP VGA card.
2-6 Connectors, Headers
2-6-1 Connectors
(1)
Power Connector (20-pin block): U11
ATX Power Supply connector. This is a new defined 20-pins connector that usually
comes with ATX case. The ATX Power Supply allows to use soft power on
momentary switch that connect from the front panel switch to 2-pins Power On jumper
pole on the motherboard. When the power switch on the back of the ATX power
supply turned on, the full power will not come into the system board until the front
panel switch is momentarily pressed. Press this switch again will turn off the power to
the system board.
(2)
PS/2 Mouse & PS/2 Keyboard Connector: KBMS1
The connectors for PS/2 keyboard and PS/2 Mouse.
(3)
USB Port connector: USB1
The connectors are 4-pins connector that connect USB devices to the system board.
(4)
LAN Port connector: LAN1 (Only for 635CS)
This connector is standard RJ45 connector for Network connector.
(5)
Parallel Port Connector (25-pin female): PARALL
AGP SLOT
PIN
ROW2
1
3.3V
2
-12V
3
GND
4
Soft Power On
5
GND
6
GND
7
GND
8
-5V
9
+5V
10
+5V
Pin 1
17
ROW1
3.3V
3.3V
GND
5V
GND
5V
GND
Power OK
+5V (for Soft Logic)
+12V
Advertisement
Table of Contents
