Starting Up Your Computer - JETWAY 635CSR1A User Manual

CDIN1 and CDIN2 are the connectors for CD-Audio Input signal. Please connect
it to CD-ROM CD-Audio output connector.
(12) Front Panel Line-In, Line-Out, MIC Headers: AUDIO

2-7 Starting Up Your Computer

1. After all connection are made, close your computer case cover.
2. Be sure all the switch are off, and check that the power supply input voltage is set
to proper position, usually in-put voltage is 220V∼240V or 110V∼120V
depending on your country's voltage used.
3. Connect the power supply cord into the power supply located on the back of your
system case according to your system user's manual.
4. Turn on your peripheral as following order:
a. Your monitor.
b. Other external peripheral (Printer, Scanner, External Modem etc...)
CDIN2 CDIN1
1
4
4
1
CD Audio-In Headers
AUDIO
Pin 1
Line-In/Out, MIC Headers
22