Table of Contents
Advertisement
2-5-4 AGP Slot
This motherboard provides an AGP Slot, support the 1X/2X AGP VGA card.
2-6 Connectors, Headers
2-6-1 Connectors
(1)
Power Connector (20-pin block) : POWER1
ATX Power Supply connector. This is a new defined 20-pins connector that usually
comes with ATX case. The ATX Power Supply allows to use soft power on momentary
switch that connect from the front panel switch to 2-pins Power On jumper pole on the
motherboard. When the power switch on the back of the ATX power supply turned on,
the full power will not come into the system board until the front panel switch is
momentarily pressed. Press this switch again will turn off the power to the system
board.
(2)
PS/2 Mouse & PS/2 Keyboard Connector:
The connectors for PS/2 keyboard and PS/2 Mouse.
PIN
ROW2
1
3.3V
2
-12V
3
GND
4
Soft Power On
5
GND
6
GND
7
GND
8
-5V
9
+5V
10
+5V
CN1
PS/2 Mouse
PS/2 Keyboard
15
Pin 1
ROW1
3.3V
3.3V
GND
5V
GND
5V
GND
Power OK
+5VSB (for Soft Logic)
+12V
Advertisement
Table of Contents
